Whether you have a screen door or a cosmetic wrought-iron door or gate, then the doors are heavy and last a very long time when you take care of those. The screen will probably wear out before the door does on a door, which you can easily replace. But when it’s time to clean wrought-iron doors or gates or you notice that rust has begun to develop — a difficulty in coastal communities and areas of high humidity — you must take action to keep it clean and rust-free if you’d like your door to last and look its very best.
Cleaning Wrought Iron
Produce a mixture of liquid Castile soap — or any other vegetable-based soap — in a bowl. A teaspoon of this soap mixed with the water should suffice. Mix the solution to create low suds.
Scrub the wrought iron using a tidy lint-free cloth dipped in the soapy solution. Begin at the peak of the screen door and work to the bottom. You might require a little stool or stepladder to do this.
Wash the wrought iron by spraying it with a hose.
Dry the door with a tidy, lint-free fabric.
Rust Painting and Removal
Take the wire metallic brush and scrape the paint and rust in the doorway. You can also use a drill using a wire-brush seams or attachment to remove the rust and flaking paint.
Wash the wrought-iron door, ensuring you dry it thoroughly prior to covering it with primer.
Use the rust-inhibiting primer to the whole surface areas of the door with a little paintbrush. In case you have decorative flat or round wrought iron, make certain to cover the whole surface of this wrought iron on all sides using the rust-inhibiting tip to protect it from rusting again. Let it dry as per the manufacturer’s directions, which fluctuate based on humidity levels and temperatures.
Apply the metallic paint color of choice above the primer. Let the paint dry at least 24 to 48 hours prior to permitting the door to be utilized.