Moldings are employed to protect the region where the ground meets the wall. They can be installed from the underside of the wall on the edge of the flooring and rest, making it hard without harming the molding to eliminate the flooring. By reducing the flooring straight next or flush to the walls, it is possible to remove old flooring and keep your molding or toe-kicks. This lets you reuse your molding or toe-kicks and conserve cash on your remodeling budget.
Put on safety glasses. Set the blade of the toe-kick observed on the ground such it is right or flush alongside the wall where you need to slice the the flooring that was old.
Firmly keep the handle along with your left hand as well as the rear handle by means of your right. Maintain and press the security button after which pull the trigger change to begin the motor of the toe-kick observed. Release the security button when the motor starts.
Move the blade of the toe-kick observed away and gradually ahead from you while you slice the the flooring near the wall. Release the trigger once you’ve finished the cut. Before the blade entirely stops keep the observed in the flooring.
Pry up the flooring using a pry-bar to eliminate the cut area.